Using Vest Edge with mobile via an Auxiliary cable

Follow these steps to connect your Woojer Vest Edge to your mobile via an AUX cable (also known as 3.5mm cable). This simple configuration allows you to enjoy a wired connection between your mobile and the Woojer Vest Edge and also enjoy the Woojer Vest Edge's integral audio amplifier without delays or lag:


  1. Press and hold the Woojer Vest Edge's power button for 2 seconds until the Woojer Vest Edge turns on.
  2. Connect the provided AUX cable - one end goes to the mobile's headphone jack and the other end goes to the Woojer Vest Edge's audio input jack. The blue LED will illuminate constantly.
  3. Connect your headphones to the Woojer Vest Edge's headphone jack.

Important: Set your mobile volume to MAX. Then, to control the headphone's volume and sensation levels - use the Woojer Vest Edge's control buttons.

 


Please be aware that if you're using a mobile device that doesn't have a 3.5mm jack, you can either use a Lightning to Audio adapter (for iOS) or an Audio to USB-C adapter (for Android.)

For connecting your Woojer Vest Edge via wireless Bluetooth connection, please refer to this article.

 

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.