Using Strap Edge with mobile via an Auxiliary cable

If you have a Woojer Strap 3, please click here.

Follow these steps to connect your Woojer Strap Edge to your mobile via an AUX cable (also known as 3.5mm cable). This simple configuration allows you to enjoy a wired connection between your mobile and the Woojer Strap Edge and also enjoy the Woojer Strap Edge's integral audio amplifier without delays or lag:

  1. Press and hold the Woojer Strap Edge's power button for 2 seconds until the Woojer Strap Edge turns on.
  2. Connect the provided AUX cable - one end goes to the mobile's headphone jack and the other end goes to the Woojer Strap Edge's audio input jack. The blue LED will illuminate constantly.
  3. Connect your headphones to the Woojer Strap Edge's headphone jack.

Important: Set your mobile volume to MAX. Then, to control the headphone's volume and sensation levels - use the Woojer Strap Edge's control buttons.

Please be aware that if you're using a mobile device that doesn't have a 3.5mm jack, you can either use a Lightning to Audio adapter (for iOS) or an Audio to USB-C adapter (for Android.)

For connecting your Woojer Strap Edge via wireless Bluetooth connection, please refer to this article.


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.