This article will instruct you on how to connect Woojer Strap Edge to your HTC Vive. Choose one of the following connection types according to the type of your headphone and according to your preferences. Please note: When using Bluetooth connections, you may experience some delay which can affect your VE experience, even when using a low-latency transmitter. 


Option 1: Wired connection with wired headphones

  1. Connect the provided aux cable - one end to the Vive's audio output jack (located at the front of the HMD), and the other end to the Strap's audio input jack. 

  2. Connect your headphone to the Strap's headphone jack. Alternatively, connect the Strap to the Vive's Audio Strap.



Option 2: Wired connection with wired headphones and an audio splitter

  1. Connect a "Y" audio splitter to the Vive's audio output jack (located at the front of the HMD).

  2. Connect the Strap audio-in port to splitter's first female jack, using a 3.5mm cable.

  3. Connect headphones (or Vive's audio Strap) to the splitter's second female jack.

Option 3: Wireless connection, using a Bluetooth transmitter and wired headphones

  1. Connect an external low-latency Bluetooth transmitter to your PC. (either one with USB or 3.5mm input)

  2. Press and hold the Strap's power button for 5 seconds until it turns on and enters pairing mode. The blue and red LEDs will start blinking alternately. 

  3. Pair the Strap with the transmitter.

  4. Connect your headphone (or Vive's audio Strap) to the Strap's headphone jack.

  5. Set the transmitter as your default playing device, using Windows settings or using SteamVR audio settings.

  6. On your PC, set the volume to max. To control the sensation level and volume level, use the Strap's control buttons.

Option 4: Wireless connection, using a Bluetooth transmitter and wireless headphones

  1. Connect an external, dual-link, low-latency, Bluetooth transmitter to your PC. (either one with USB or 3.5mm input)

  2. Press and hold the Strap's power button for 5 seconds until it turns on and enters pairing mode. The blue and red LEDs will start blinking alternately. 

  3. Pair the Strap with the transmitter.

  4. Pair the Bluetooth headphone with the transmitter as well. 

  5. Set the transmitter as your default playing device, using Windows settings or using SteamVR audio settings.

  6. On your PC, set the volume to max. To control the sensation level, use the Strap's control buttons.


Option 5: Wireless connection, using a Bluetooth transmitter and audio mirroring

The following solution enables you to keep using your Vive's audio strap, while using the Strap Edge, untethered.

  1. Connect an external, low-latency, Bluetooth transmitter to your PC.

  2. Press and hold the Strap's power button for 5 seconds until it turns on and enters pairing mode. The blue and red LEDs will start blinking alternately.

  3. Pair the Strap with the transmitter.

  4. Set the transmitter as your default playing device.

  5. Apply audio mirroring so that the audio is routed via both the Strap and your HMD, simultaneously. You can apply audio mirroring by configuring the SteamVR settings or by using external software, like VoiceMeeter.

  6. On your PC, set the volume to max. To control the sensation level, use the Strap's control buttons.




Audio mirroring by Win/Steam VR